2" Zinc Hose Mender Inlet Threads_Storz We used a Honda self-priming

We used a Honda self-priming water pump with a two inch inlet and a two inch outlet that produces 135 gallons per minute (GPM)

NSN 4210-01-526-2977 NFES 0933

TWO KITS are often required if both swivels are missing

The hose mender is not designed for compressible products such as air

2" Zinc Hose Mender Inlet Threads_Storz We used a Honda self-primingThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or